Which is better for your patios: pavers or stamped concrete?

Depending on the materials, installation, Imprinted Concrete Restoration and simplicity of care, your homes outside area, particularly the patio, can be an asset or a nuisance. If you're debating whether to go with pavers or stamped concrete, here's a breakdown of the pros and cons, design, installation, and upkeep.

 

Pavers or stamped concrete patios?

 

Cost

 

Pavers cost from $20 to $30 per square foot in 2019. Which does not include the cost of labour, which ranges from $10 to $30 per square foot. Stamped concrete costs between $16 and $18 per square foot, with a more complicated pattern costing up to $20. 

 

Installation

 

Pavers

 

Because it is more labour-intensive, a standard 1000 square foot paver patio will take four to five days to finish with a crew of four to five people working on it.

 

Stamped concrete

 

Stamped concrete/ Imprinted Concrete Restoration is quicker, faster, and less work to install since it just requires mixing, pouring, and stamping. It does, however, begin with correct subgrade compacting.

 

Workers only have a short time after the concrete is poured before it begins to solidify. They must also apply the colour hardener to the surface in addition to stamping concrete.

 

Maintenance

 

The loosening and settling of pavers and brick stones by Pattern imprinted concrete contractor might result in an uneven surface. This might result in tripping risks. When the ground begins to become uneven, the stone pavers must be removed and the sand bed levelled before the paver stones may be reinstalled.

 

Design

 

In comparison to stamped concrete, pavers have fewer design options. It's possible to make stamped concrete look like marble, wood, or even bricks.

 

The downside of stamped concrete

 

When stamped concrete is not done correctly by Pattern imprinted concrete contractor, it will crack, especially if the concrete and water combination is too dry.

 

Efflorescence is also likely to occur if the container is not adequately sealed. Efflorescence is a chalky white salt stain that can occur in any cement-based product.