Understanding the problems with stamped concrete

Stamped concrete is one of the beautiful options for paving. It is a poured concrete design that can resemble in design and texture other paving options like natural stone, or other substances. It is also dyed to create other features. Though stamped concrete is a cheaper option, yet it holds more aesthetic appeal as compared to other options. However, stamped concrete has a few drawbacks. 

Here are 5 Imprinted concrete driveway problems that you should consider before buying stamped concrete.

It tends to crack over time

 When stamped concrete or any other concrete is exposed to freezing or thawing cycles, it gets cracked.

It gets slippery when wet

The surface finish done to the stamped concrete makes them slippery when wet. Get the best Pattern imprinted concrete contractor here.

It is difficult to get accurate colour on a colored patio

In some concrete, only regular concrete is poured and then afterwards a sealer or colour agent is sprayed to give the desired colour. However, this sealant gets peeled off with time. This requires to seal again and again that adds expenses. That’s why some concrete has dye mixed in the color to give the desired colour. However, it sometimes happens that the colour of the concrete doesn’t match the desired colour of the customer. This is because the dyeing process used in this process is not specific. The pre-mixed concrete can’t be reused, thus its only solution is to exchange it which time-consuming problem. You can take the advice of a Pattern imprinted concrete contractor.

It is difficult to repair or change

Once the stamped concrete is set up in its place and dried, it becomes permanent. You cannot fix any problem or imperfection, chipped corners or edges, or puddling issues. Its possible solution is to cut a patch of concrete and then repair it or demolish and repeat the same process.

Salt cannot be used to remove ice from stamped concrete

This is one of the major Imprinted concrete driveway problems. The chemical compound is present in a salt chip on the surface of the concrete.